Monthly Archives: May 2018
Some cameras have a function to preview the depth of field. To understand how it works, you first need to know what the depth of field is, for example, you can read about it here.
Modern cameras always perform focusing at the maximum aperture. For example, if a standard 18-55mm F / 3.5-5.6 lens is used, then focusing will always be done on apertures from F / 3.5 to F / 5.6 (depending on the focal length). Continue reading
Usually, after all the ‘Auto’-modes of the camera get bored, a lot of people start using special semi-automatic modes M, A, S, P. These modes can be found on the camera control wheel, as shown in the picture below. Usually mode M, A, S, P are allocated in a separate set, for example, in the photo below, these modes are highlighted with a special arc that unites them. You can come across instead of naming ‘M, A, S, P’, another naming – ‘P, A, S, M’ or ‘M, AV, TV, P’ – all the same. About these modes just I will try to tell in this article. Continue reading